WMP-SERIES
PLASTIC Bodied Magmeter
1, 2 or 3 inch full port
1 inch NPTF, 2 or 3 inch flange clamps with 2 or 3 inch NPTF fitting kit
150 psi or 10.3 bar working pressure @ 70 ̊ F
10 ̊ to 130 ̊ F (-12 ̊ to 54 ̊ C) operating, -40 ̊ to 176 ̊ F (-40 ̊ to 80 ̊ C) non-operating
+/-1% of reading
(between 10% and 100% of max flow)
+/-3% of reading
(between cutoff and 10% of max flow)
1 inch:
2.3 GPM (.145 LPS) 2 inch: 6 GPM (.38 LPS)
3 inch: 14 GPM (.88 LPS)
1 inch:
110 GPM (6.94 LPS) 2 inch: 300 GPM (18.9 LPS)
3 inch: 670 GPM (42.3 LPS)
Glass-filled polypropylene
316 stainless steel
Diecast aluminum, powder-coated
Polyethylene
Rate
Total
6
8
Gallons/Minute, Cubic Feet/Second,
Acre-Feet, Acre-Inch, Gallons, Gallons x 1000,
Cubic Feet/Minute, Liters/Second
Cubic Feet, Liters, Megaliters, Cubic Meters
Liters/Minute, Cubic Meters/Minute
Cross-drilled screws and tamper-evident seal (optional)
10-30 Vdc @ 60 mA max (15 mA average)
NOTE:
Using an unregulated power supply >18 Vdc may damage the meter due to AC line input voltage fluctuation
6 each AA alkaline cells, replaceable. Estimated life is 1-2 years depending on usage (standard)
2 each C lithium batteries, replaceable. Estimated life is 2-4 years depending on usage (Extended battery life option)
Current sinking pulse, opto isolated, 32 Vdc max at 10 mA max
1 unit/pulse out, pulse width of 10ms depending on unit selection
1” 2”
3”
P
ulse width 1.1 ms, min - max frequency, 3 - 150 hz
80 30
13
Hardware/software, conductivity-based
>20 microSiemens/cm
NEMA 4X standard
5 pin male circular connector, mates to industry standard cable (20ft/6m)
Pipe Size
Fittings
Pressure
Operating Temperature Range
Accuracy
Flow Range
Minimum
Maximum
Materials
Body
Electrodes
Electronics Housing
Display Cover
Display
Digits
Units
Security
Power
WMP101
WMP104
Pulse Output
(WMP101 Only)
Signal
Standard Pulse Rate
High Frequency
(Optional)
Pulse
/Unit
Empty Pipe Detection
Conductivity
Environmental
Electrical Connection (WMP101 Only)
SPECIFICATIONS*
*Specifications subject to change • Please consult our website for current data (www.seametrics.com)
Seametrics Fitting Kit
for 2 & 3 inch model
2 inch
Cross-drilled screws (2) for tamper-evidence
Corrosion-resistant glass-filled polypropylene body
Lightweight for easy handling
Powder-coated diecast-aluminum electronics housing
LCD rate and total indicator
316SS electrodes
Brand : Seametrics (Amerika)